Flame Detectors Test Lamp

The SENSE-WARE T-229/4P flame detector test lamp activates UV, IR and UV/IR flame detectors which detect in the 185-235 nm UV and 4.4 µ IR frequency ranges. For UV only detectors the maximum distance is up to 8 meters (26 ft) in the continuous mode. The test range for IR and UV/IR detectors is up to 4 meters (13 ft). Most IR Flame detectors have an extra alarm criterion; analyzing the flicker frequency of a fire. In order to simulate 
the flame flicker, the lamp needs to be pulse operated. For this, the test lamp T-229/4P can be put into the pulse mode by means of a selection switch on the left side of the test lamp. The lamp then emits pulsed light with a frequency of approx. 2 Hz. After the alarm delay time the IR or UV/IR flame detector will activate. 

Specifications: 

Adapter (charger) 100-240 Vac, 1600 mA switching with plugs for US, EU, GB and AU 
Test range UV flame detectors up to 8 m (26 ft) in continue mode, up to 4 m (13 ft) in pulse mode 
Test range IR and UV/IR flame detectors up to 4 m (13 ft) 
Battery sealed Lead Acid battery, 12 Vdc / 2.7 Ah 
Lamp 12 Vdc / 100 W 
Use 10-15 minutes under optimal conditions and continuous use 
Housing PC/ABS 
Shipping dimensions (box) 310 x 220 x 210 mm (12 5/8 x 9 x 8 5/8 “ ) 
Shipping weight 2.1 kg (4.62 lbs) 
Ingress protection rating IP30 / NEMA 1 
Temperature range +4 to +40 0C (+39 to +104 0F) 
Country of Origin/Intrastatistic Number EU, 8531 10 30 
Carrying case material Case: polypropylene, inlay polyurethane 
Shipping dimensions (box) 440 x 340 x 280 mm (17 3/8 x 13 3/8 x 11 “ ) 
Shipping weight incl. test lamp 5.0 kg (11.1 lbs) 

Battery specifications: 
Battery type sealed rechargeable lead acid battery 
Battery voltage and capacity 12 Vdc/ 2.7 Ah 
Dimensions l x w x h 103 x 70 x 46 mm 
Type BATT4P